Horizontal cabling

 .E1
  OBJECTIVES, REQUIREMENTS, EQUIPMENTS ObjectivesPredisposizioneExperimentQuestions

Objectives

   

Requirements (PC)
In this experiment we want to show how to carry out an example of horizontal cabling inside a building floor.
The horizontal cabling is necessary for the connection of the different work places at the floor distributor.
Its topology is of stellar type starting from the floor distributor.
In the exercise we suppose to use a HUB in the floor distributor and the connections are performed to connect N.2 PC's among them.		    
  N.2 PC with network Card Ethernet 10/100Mb and connector for 10base-T
  TCP-IP protocol installed on both PC's
  (Installation of the TCP/IP protocol)

Laboratory Equipments
  Module DL TC74-MC
N.2 HUB Mod. TC74-DH 
N.4 patch cables
 
  SYSTEM SETTING ObjectivesPredisposizioneExperimentQuestions
Connection diagram

Connect the two computers according to the previously shown diagram and start, on both of them, the network communication program which is used for the experiment.

   

Starting of the software
DLnetw

 

  

Description software
DLnetw

 
   EXPERIMENT

Operation check of the horizontal cabling

 ObjectivesPredisposizioneExperimentQuestions
Set the computer PC1 to operate as a  server with:
LocalAddress = PC1
LocalPort = 1000
Push the Listen button.
   
Set the computer PC2 to operate as a PC1 client with:
RemoteAddress = PC1
RemotePort = 1000
Push the Connect button.		 When the button 'Connect' is pushed PC2 connects to the server PC1.
If the program doesn't show error messages the connection is right and the networks is operating.
   
Send a file from the computer Client PC2 to the server PC1. Check the right data transmission.
 
   QUESTIONS ObjectivesPredisposizioneExperimentQuestions
How is the cable connecting the PC to the user's plate called (Telecommunication outlet) ?
Equipment cable (Ec)
 		 Answer:
Work are cable (WAC)
PC cable (PCc)