DL 2676

Dead Time Element

DL 2676

Module DL 2676 allows the insertion of an adjustable real dead time in those processes which are characterized by it.

Technical features

DL2676.gif (5969 byte)

	Power supply: +15 V ; 0 V ; -15 V
	Signal voltage range: -10V, ..., +10V
	Proportional coefficient of the module K_S = 1
	Dead time T_t = 10 ms .... 100 ms / 100 ms .... 1 s
	Three position switch for coarse setting and exclusion of the dead time
	Potentiometric fine setting
	Leds indicators of over-range

Description

1.	Terminal for the input signal to the dead time simulation module
2.	Terminal for the output signal from the dead time simulation module
3.	Potentiometer for the fine setting of the dead time
4.	Three position switch for the coarse setting and/or exclusion of the dead time
5.	Led "over" on when the output voltage is higher than 10 V or lower than -10 V